Carrier Access SNMP manual Dsx

Command Line Interface (CLI)

dsx0csu0	DSX	( 0’-132’) or CSU 0.0 db
dsx133	DSX	(133’-265’)
dsx266	DSX	(266’-398’)
dsx399	DSX	(399’-532’)
dsx533	DSX	(440’-550’)
csu7	CSU	7.5 db
csu15	CSU	15.0 db
csu22	CSU	22.5 db
linetype	Set	DS1 Line Type
esf	ESF	Line Type
d4	D4	Line Type
linecode	Set	DS1 Coding Type
ami	AMI	Line Coding
b8zs	B8ZS Line Coding
prm	Set	DS1 Performance Monitor Message Type
ansi	ANSI T1.403		ESF PRM
att	AT&T 54016		ESF PRM
send	Send Test Data on Port
clear	Clear Test Data Statistics
error	Inject Single Error on Port
off	Stop Send for Normal Operations
loopdown	Send In-Band Remote Loop Down
loopup	Send In-Band Remote Loop Up
statistics	Display Send Statistics
network	Send Pattern Toward Network
[p] [r]	p -	optional pattern

alt	- alternating 1/0
d4up	- D4	loopup: 00001
d4dn	- D4	loopdown: 001
ones	- all ones
p1in8	- 00000001
p511	- O.153
p2047	- O.152

p2to15 - O.151
p2to20 - QRSS w/o bit			stuffing
p2to23	- O.151
qrss	-	QRSS pattern	(default)
zeros	-	all zeros

r - optional error rate

0- disable errors (default) r=1-7 - error rate of 10^-r

QRSS to net	ds1 d1	send network > ds1 d1 send network
	QRSS
p511 to net	ds1 d2	send network p511 4
equipment	Send Tones		to Equipment connected to ds1
[o]	Equipment Send Usage:
	o - Option		for FX PCM
	off	-	turn off test tones

9/24/01 14-13