Carrier Access SNMP manual Chassis Mounting

Chassis Mounting

Dual RS-232 data and magagement cable (10 ft) for connection to a	005-0001 - DCE - MFF -
router, computer, statistical multiplexer, SNA cluster controller, or	10’ - 10’
SCADA equipment. This cable supports both synchronous operation
at 56 or 64 Kbps, and asynchronous operation at 9.6, 19.2, 28.8, 38.4,
and 57.6 Kbps.
V.35 data cable - 10 ft	005-0008-DCE-MM-10’
V.35 data cable - 25 ft	005-0009-DCE-MM-25’
V.35 data cable - 50 ft	005-0010-DCE-MM-50’
19” heavy duty rack mounting brackets (2) with sixteen (16) 6-32 x 3/	004-0041
8” phillips pan-head screws
23” heavy duty rack mounting brackets (2) with sixteen (16) 6-32 x 3/	004-0113
8” phillips pan-head screws
220Vac/50Hz to -48Vdc Power Conversion Cube for international	AB-220Power
applications with custom wall plug adapter

In addition, you will need one or more of the following items:

•A standard 25-pair telephone cable with “D” style 50-pin male connector to connect the Access Bank II - SNMP to your punch-down block or RJ-11 “Harmonica.”

•If you are wall-mounting the Power Converter Cube, you will need four fasteners appro- priate for mounting a seven-pound object.

4.3Chassis Mounting

The Access Bank II - SNMP can be wall-mounted, rack-mounted, or surface-mounted. Prior to mounting the Access Bank II - SNMP chassis, ensure that the installation site meets the following cri- teria:

•Adequate clearance for access to control panel DIP switches, cable routing, and ventila- tion. Leave at least 18 inches behind the back plate for maintenance and accessing the slide-in voice cards.

•Because the cables on the power conversion cube total 13 feet in length, there should be a properly grounded, 110 VAC power outlet within 10 feet of the Access Bank II - SNMP Control Panel.

•A stable environment, clean and free from extremes of temperature, shock, vibration and EMI, with a relative humidity between 0 and 95%.

•An ambient temperature that stays below 40º C (104º F).

9/24/01 4-3