Carrier Access SNMP manual Kill, Loop, 14.4.4.18 mac, Make

14.4.4.16 kill

Use the kill command to remove time slot connections. This command is used to kill static connec- tions and group definitions.

Operations	Type	Comments
To remove a bypass	kill bypass d1:24	Kills the connection for slot 24 on T1
connection on T1 #1		#1
To display command	kill ?
Help

14.4.4.17 loop

Use the loop command to display, disable and enable loopbacks.

Operations	Type	Comments
To set a line loopback	loop d1 network line	Puts T1 #1 in network line loopback.
towards the network on
ds1 1
To verify loopback status	loop
To display Help	loop ?

14.4.4.18 mac

Use the mac command to display the six-byte MAC address in hexadecimal.

14.4.4.19 make

Use the make command to configure static connections and group definitions.

14-24 9/24/01