3-4-6

Using Table & Graph

u To add a number table line

(1)Tap the x-value of the bottom line of the number table.

(2)Tap [T-Fact] and then [Add].

Added line

The new line contains the same values as the bottom line of the number table.

•After adding a new line, you can edit the x-value, if you want. For more information, see “Editing Number Table Values” on page 3-4-4.

•You can add a line anywhere. When you add a line, it will appear after the line you selected.

Regenerating a Number Table

After changing [Table Input] settings, you can regenerate a table based on the new settings by tapping a and then [ReTable]. You can also use [ReTable] after editing the contents of a table to return the table to its original (pre-edited) state.

20050501