Creating a New Program
Running a Program
The following procedure shows how to run the sample program we input under “Creating and Saving a Program” on page
u ClassPad Operation
(1)Display the Program Loader window.
•From the Program Editor window, tap ), or tap Oand then [Program Loader].
•From another application, tap mand then p.
•This causes the Program Loader window to appear.
(2)Tap the [Folder] down arrow button, and then select the name of the folder you want.
(3)Tap the [Name] down arrow button, and then tap the name of the file you input in step (3) of the example on page
(4)Tap p, or tap [Run] and then [Run Program] to run the program.
(5)Input a side length of 7 and tap [OK] twice.
7 [OK] [OK]
(6)Tap the Program Loader window and repeat steps (4) and (5) for sides of length 10 and 15.
p10 [OK] [OK] p15 [OK] [OK]
Tip
•In step (4) of the above procedure, you can specify parameters before running the program.
For more information, see “Configuring Parameter Variables and Inputting Their Values” on page
20050501