6-3-4

Recursive and Explicit Form of a Sequence

(7) Configure View Window settings as shown below.

xmin = 0

xmax = 6

xscale = 1

xdot: (Specify auto setting.)

ymin = –15

ymax = 65

yscale = 5

ydot: (Specify auto setting.)

(8)After everything is the way you want, tap [OK].

(9)Tap the down arrow button next to #, and then select + to create the table.

(10)Perform one of the following steps to draw the type of graph you want.

• To draw a connect type graph, tap $.

• To draw a plot type graph, tap !.

In the above example, “4 Cells” is selected for the [Cell Width Pattern] setting on the [Cell] tab of the Basic Format dialog box (page 14-3-3).

20050501