5-1-1

3D Graph Application Overview

5-1 3D Graph Application Overview

This section describes the configuration of the 3D Graph application window, and provides basic information about its menus and commands.

Starting Up the 3D Graph Application

Use the following procedure to start up the 3D Graph application.

u ClassPad Operation

On the application menu, tap D.

This starts the 3D Graph application and displays the 3D Graph Editor window and the 3D Graph window.

3D Graph Application Window

The 3D Graph application has a 3D Graph Editor window and a 3D Graph window. Both of these windows appear on the display when you start up the 3D Graph application. Functions you input on the 3D Graph Editor window are graphed on the 3D Graph window.

3D Graph Editor window

3D Graph window

Graph controller arrows

•The 3D Graph Editor has five tabbed sheets named Sheet 1 through Sheet 5. Each sheet can contain up to 20 functions. This means you can have up to 100 functions stored in the 3D Graph Editor at one time.

•You can select any one of the expressions on the 3D Graph Editor window and graph it on the 3D Graph window.

•You can tap the graph controller arrows on the 3D Graph window or press the cursor keys to rotate the graph.

•When using Trace (page 5-5-1), tap the Graph Controller arrows or operate the cursor key to move the pointer along the graph.

20050501