Configuring Communication Parameters
16-3 Configuring Communication Parameters
Before trying to transfer data with the ClassPad, you should perform the procedures described in this section to configure its data communication parameters.
u ClassPad Operation
(1)On the application menu, tap B.
•This starts the Communication application and displays a window that shows its current communication parameter settings.
(2)Tap [Setup] and then [Open Setup Menu].
•This displays a dialog box for changing communication parameters, like the one shown below.
(3) Configure the communication parameter settings as described below.
• Items marked with an asterisk (*) are initial defaults.
u Hard Copy
Specify “To outer device”.
u Cable Type
When connecting to this type of device: | Select this setting: |
Another ClassPad unit or a Data Analyzer | 3pin cable |
A computer’s USB port | USB cable* |
20050501