7-3-2

Before Trying to Draw a Statistical Graph

When you want to do this:

Do this:

Turn off graphing of the last regression

Clear the check box next to [Previous Reg].

calculation results

 

 

 

Have Statistics View Window settings

Tap [Stat Window Auto] and then select

configured automatically

[On].

 

 

Configure Statistics View Window settings

Tap [Stat Window Auto] and then select

manually

[Off].

 

 

Configuring StatGraph Setups

Use the procedure below to display the Set StatGraphs dialog box and configure the nine StatGraph setups.

u To display the Set StatGraphs dialog box

(1)On the List Editor window, tap [SetGraph] and then [Setting…].

• This displays the Set StatGraphs dialog box.

Tabs

Tab selection buttons

•There is a tab for each StatGraph setup, named StatGraph1 through StatGraph9.

(2)Tap the tab selection buttons to display the tab for the StatGraph setup whose configuration you want to change.

(3)Configure the StatGraph setup settings you want as described below, and then tap [Set]. This will apply the settings for all nine StatGraphs.

•To exit the Set StatGraphs dialog box without changing any settings, tap [Cancel] instead of [Set].

20050501