Editing Cell Contents
Using Drag and Drop to Copy Cell Data within a Spreadsheet
You can also copy data from one cell to another within a spreadsheet using drag and drop. If the destination cell already contains data, it is replaced with the newly dropped data.
•When performing this operation, you can drag and drop between cells, or from one location to another within the edit box only. You cannot drag and drop between cells and the edit box.
Important!
•Remember that moving cell data within a spreadsheet using drag and drop will cause all relative cell references in the data to be changed accordingly. See “Inputting a Cell Reference” on page
u To drag and drop between cells within a spreadsheet
(1)Use the stylus to select the cell or range of cells you want to copy so it is highlighted. Lift the stylus from the screen after you select the cell(s).
• See “Selecting Cells” on page
(2)Hold the stylus against the selected cell(s).
Selection boundary
•Check to make sure that a white selection boundary appears where you hold the stylus against the screen.
•If you have multiple cells selected (highlighted), the selection boundary will appear only around the single cell where the stylus is located. See “Dragging and Dropping Multiple Cells” on page
(3)Drag the stylus to the desired location and then lift the stylus to drop the cell(s) in place.
20050501