Using List Editor
kClosing a List
Closing a list saves it under its current list (variable) name.
There are two different methods you can use to close a list: using the [Close List] command, and clearing the list name from its list name cell.
u To close a list using the “Close List” command
(1)On the List Editor window, select any cell of the list you want to close.
(2)On the menu bar, tap [Edit] and then [Close List].
•The selected list disappears from the display and is replaced by all blanks.
•At this time, the “list=” box also appears. To open another list, enter its name into the “list=” box, and then tap w.
Tip
•This above operation clears the list from the display only. The list is still stored as a list variable in memory, and can be opened when you need it again.
u To close a list by clearing its list name
(1)On the List Editor window, select the list name cell of the column of the list you want to close.
(2)Tap the “list=” box at the bottom of the List Editor window.
(3)Press the ckey so the list (variable) name is cleared.
(4)Tap w.
Inputting Data into a List
Use the procedures in this section to input data and expressions into a list.
u To input a single data item
(1)On the List Editor window, select the cell where you want to input the data item.
• Use the cursor key to move the highlighting, or tap the cell with the stylus.
Line number where |
|
| String input |
|
| ||
data is being input |
|
| |
|
|
| |
|
|
|
|
| Input data Cell where data | ||
|
|
| is being input |
20050501