1-2-2

Turning Power On and Off

Limiting the Duration of the Sleep State

You can use the [Power Save Mode] setting (page 15-6-1) to limit the duration of the sleep state that is entered by the Resume function. If you have “1 day” specified for [Power Save Mode], for example, the ClassPad remains in the sleep state for one day after power is turned off. After that, the ClassPad powers down completely, which deletes all data that was backed up by the Resume function.

The following describes the difference between powering up from the sleep state and powering up after the ClassPad powers down completely.

kPowering Up from the Sleep State

Power comes on immediately, with all data backed up by the Resume function restored.

kPowering Up after Complete Power Down

1.Press the okey or tap the ClassPad screen.

•This causes the ClassPad to perform it startup routine, which takes a little time to complete.

2.The application menu will appear after you finish the touch panel alignment procedure.

Tip

•See “15-6 Configuring Power Properties” for information about changing the [Power Save Mode] setting.

20050501