2-24
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Front Cards
When the CESM is combined with a back card, a card set is created. Table 2 -12 provides information
about each CESM, interface, and corresponding backcard.
Note For information on CESM software features and configurations, refer to the Cisco Circuit Emulation
Services (CESM/MPSM-8-T1E1) Configuration Guide and Command Reference for MGX Switches,
Release 5.2. For technical specifications for the CESM cards, see the “Single-Height Service Module
Specifications” section on page A-2.
Table2-12 CESM Cards, Interfaces, and Supported Back Cards
CESM
Interface
Connections
Number of Lines
Supported Types of Lines Supported Supported Back Cards
CESM-8E1 Line or trunk Up to 8 E1 (up to 2.048 Mbps) •MGX-RJ48-8E1 (for
use in Australia)
•RJ48-8E1
•R-RJ48-8E1 (for use in
Australia)
•SMB-8E1
•R-SMB-8E1
CESM-8T1 and
CESM-8T1/B
Line or trunk Up to 8 T1 (up to 1.544 Mbps ) •RJ48- 8T1
•R-RJ48-8T1