5-88
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter5 Installing the Cisco MGX Switch or Gateway
Installing the MGX 8950 Switch
Figure5-53 Power Interconnect Connections for DC
Connect the Back Cards
Connect the interfaces from the back cards to the appropriate end device. See AppendixB, “Cable
Specifications” for cabling specifications and pinouts.
Once you have connected your back cards, route the cables through the cable management assembly. The
upper card set cables run to the upper cable management pan el, and the lower card set cables run to the
bottom cable management panel. Figure 5-54 shows cables routed through the upper c able
management panel.
44396
DC power
interconnect
cables