3-54
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter3 Preparing for Installation
Site Requirements for a MGX 8830 or MGX 8830/B Switch
AC power supply tray power cable—For AC-powered systems
AC power cord for AC power supply tray, optional for AC power:
Argentina: Cisco Part Number CAB-ACR
Australia: Cisco Part Number CAB-ACA
Continental Europe: Cisco Part Number CAB-ACE
Great Britain: Cisco Part Number CAB-ACU
Ireland: Cisco Part Number CAB-ACU
Italy: Cisco Part Number CAB-ACI
New Zealand: Cisco Part Number CAB-ACA
North America: Cisco Part Number CAB-AC-125V/13A (125 VAC, 13 A) or
CAB-AC-250V/13A (250 VAC, 13 A)
Switzerland: Cisco Part Number CAB-ACS
Wire for DC power connection—10 AWG (4 square mm) or larger three-wire solid or
stranded copper wire with insulation rating for 140°F (60°C)
Stability plate kit, optional—Cisco Part Number STRATM-STAB
ESD protection equipment—Required whenever you handle Cisco equipmen t, which
includes the switch, cards, and modules
Mounting screws—To mount the Cisco MGX 8830 switch and optional AC power supply
tray in the rack
Tools
Small- and medium-sized flat-blade screwdrivers
Small- and medium-sized Phillips screwdrivers
3-in-1 tool (part 700-07569-01) with the following heads:
A flat head for unlatching front card ejectors and loosening and tightening the back card
captivescrews
A hex head for unlatching the chassis door
A Phillips head for loosening and tightening the back card captive screws
Power screwdriver, optional
Wire stri pper
Wire-wrapping tool, optional
Fuse replacement tool (218090-00).
Warning
This tool should only be used by trained personnel.
Table3-21 MGX 8830 or MGX 8830/B Required Tools and Equipment (continued)
Check Tools and Equipment