2-43
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter2 Illustrated Card List for MGX Switches and the MGX 8880 Med ia Gateway
Front Cards
The MPSM-16-T1E1 card supports the feature s as summarized in Tab le 2-21 .
Table2-21 MPSM-16-T1E1 Supported Feature Summary
Feature Grouping Description
General •Support for SPVCs, SVCs, SPVPs and PVPs.
•Maximum of 2000 connections supported. Any combination of Fr ame Relay
and ATM connections is allowed.
•Support for FR-FR, FR-ATM, ATM-FR, ATM-VISM, SPVC connection types,
where one of end-points resides on the MPSM-16-T1E1 card.
•Support for OAM fault management.
•Support for statistics collection and upload to Cisco Wan Manager (CWM).
•Support for configuration upload to CWM.
•1:1 hot standby redundancy plus standard MGX RAS features.
•1:N cold standby redundancy
•Connections provisioned on PNNI control plane on the MGX 88 50 platform
using the MSF switch architecture based VSI (Virtual Switch Interface).
•Provisioning XPVC endpoints supported on this card.
•Licensing of the features supported by card.
Supported
Services
•Frame Relay
•ATM
•Inverse Multiplexing for ATM (IMA)
•Any Service Any Port (ASAP)
Physical Layer •Physical interfaces configurable as channelized or unchannelized ports for:
–
16 T1 connections
–
16 E1 connections
•Fault management and performance management for T1 and E1 interfaces.
•BERT support.