1-42
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter1 Product Overviews
Cisco MGX 8950 Switch
Figure 1-26 shows an example of two back cards installed in an APS connector. When the two back cards
are linked to an APS connector, they form an APS assembly. The APS assembly is installed in the rear
of the switch. For more information, see the Table 4-4 .
Figure1-26 APS Assembly Example for MGX 8950 (MGX-APS-CON-8950)
The following modules support the MGX 8950 APS connector (MGX-APS-CON-8950). For more
information about APS options and requirements, see Ta ble 4-4 .
•AXSM-1-2488/B
•AXSM-4-622/B
•AXSM-16-155/B
•AXSM-1-9953-XG
•AXSM-4-2488-XG
•AXSM-8-622-XG
•AXSM-16-155-XG
For information on APS configuration, refer to the appropriate Cisco MGX release notes, or the Cisco
MGX software configuration guide for your software release.
149631