2-121
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter2 Illustrated Card List for MGX Switches and the MGX 8880 Med ia Gateway
Back Cards
Figure 2-63 shows the PXM-UI-S3 back card faceplate.
Figure2-63 PXM-UI-S3 Faceplate
Note The control port has a default data rate of 9600 bps. The data rate is configurable using the cnfserialif
command from 1200 bps to 38400 bps.
The LAN1 port provides a 10/100 base-T Ethernet interface.
1An RJ-45 receptacle for the control port (CP) 4Two RJ-48 external T1/E1 clock ports and
LEDs (EXT CLK 1 and EXT CLK 2)
•Green—The clock is active.
•Off—The clock is either inactive or not
provided.
2An RJ-45 receptacle for the maintenance port
(MP)
5One DB-15 female connector ALARM port
for visual and audible alarms (critical, major,
and minor)
3Two RJ-45 receptacles for the LAN ports
(LAN1 and LAN2)
Note LAN2 is not supported.
PXM
UI-S3
C
P
M
P
A
L
1
N
L
2
N
A
EXT CLK 1
L
A
A
R
M
84005
EXT CLK 2
1
2
5
3
4