Chapter 3 Connecting a Cisco Reader Module
Installing the Cisco Reader Module
–If the relay is normally open, use the C & NO connections. The circuit is closed when triggered.
–If the relay is normally closed, use the C & NC connections. The circuit is opened when triggered.
Figure 3-11 Output Connections: Cisco Physical Access Gateway and Reader Module
1
2
271593
1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 |
Normally Open (N.O.) connection |
|
| 3 | Normally Closed (N.O.) connection | ||||
C (Common) |
|
|
|
|
|
|
|
|
Step 7 See the Cisco Physical Access Manager User Guide for information to configure the module ports.
| Cisco Physical Access Gateway User Guide |
|
