Appendix N

Access of Multiple VLANs over a SSL VPN Tunnel

 

Appendix N:

 

 

 

 

 

 

 

 

3. At the cmd prompt, enter the following:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Access of Multiple VLANs

route add <destination ip> mask 255.255.255.0

 

<gateway ip>

 

over a SSL VPN Tunnel

Example:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

route add 192.168.3.0 mask 255.255.255.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Overview

 

 

 

 

 

 

 

 

192.168.1.201

 

 

 

 

 

 

 

 

 

4. Press the Enter key.

 

The 4-Port SSL/IPSec VPN Router (model number: RVL200)

Mac OS X

 

can allow a computer on the Internet to communicate with

 

a local computer, even though they belong to different

1. Click Finder.

 

Virtual Local Area Networks (VLANs).

 

2. Select Applications > Utilities > Terminal.

 

SSL VPN Connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Enter one of the following:

 

Establish an SSL VPN connection between the computer

sudo route add -net <destination ip> <gateway ip>

 

on the Internet, designated PC 1, and the RVL200. (Refer to

<subnet mask>

 

“Appendix B: Virtual Passage SSL VPN Client” for details.)

Example #1:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the configuration example,

the RVL200 assigns

sudo route add -net 192.168.3.0 192.168.1.201

 

192.168.1.201 to PC 1.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

255.255.255.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

 

 

NOTE: By default, the SSLVPN client is a member

 

 

 

 

 

of default VLAN1.

 

 

 

 

 

 

 

 

sudo route add -net <destination network> <gateway

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ip>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example #2:

 

WAN

 

 

 

 

 

 

 

RVL200

sudo route add -net 192.168.3.0/24 192.168.1.201

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Press the Enter key.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Linux OS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Default VLAN1

Enter the following:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

route add -net <destination ip> netmask 255.255.255.0

192.168.1.201

 

 

 

 

 

 

 

 

 

 

 

 

 

gw <gateway ip>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

route add -net 192.168.3.0 netmask 255.255.255.0 gw

 

 

 

 

 

VLAN2

 

 

 

 

 

 

 

 

192.168.1.201

 

 

 

 

 

192.168.3.201

 

 

 

 

 

SSL VPN Client Communicating with a Client Belonging to a

 

 

 

 

 

Different VLAN

 

 

 

 

 

 

 

 

 

Static Route

On the local computer, designated PC 2, configure a static route to access a member of a different VLAN.

Follow the instructions for the operating system of PC 2.

Windows Operating System (OS)

1.Click Start.

2.Select Programs > Accessories > Command Prompt.

4-Port SSL/IPSec VPN Router

98

Page 106
Image 106
Cisco Systems RVL200 manual Appendix N, Access of Multiple VLANs, Over a SSL VPN Tunnel, Static Route