Chapter 4 | Advanced Configuration |
Port Management > VLAN Membership
VLAN Membership
VLAN ID Select the VLAN ID number that you configured on the Create VLAN screen.
Description Enter the VLAN group name. You can use up to 50 characters.
For the default VLAN 1, all ports will be set to Access mode and all frames will be UnTagged.
For the Router’s four ports, select the appropriate mode:
Access Select this mode if you want the port to be UnTagged or Excluded.
Trunk Select this mode if you want the port to be Tagged, UnTagged, or Excluded.
General Select this mode if you want the port to be Tagged, UnTagged, or Excluded.
For the Router’s four ports, select the appropriate port type:
UnTagged Select this type if you want the port to be UnTagged.
Tagged Select this type if you want the port to be Tagged.
Exclude Select this type if you want the port to be excluded from the selected VLAN.
Port VLAN Summary
The Port VLAN Summary table lists the settings for the selected VLAN:
Port ID The Router’s LAN ports are listed in this column.
Port VLAN Summary The Tagged (T) or UnTagged (U) status for each port is displayed in this column.
Click Save Settings to save your changes, or click Cancel Changes to undo them.
QoS > Bandwidth Management
Quality of Service (QoS) features let you control how the Router manages network traffic. With Bandwidth Management (Layer 3), the Router can provide better service to selected types of network traffic. There are two types of functionality available, and only one type can work at one time. Rate Control functionality is for minimum (guaranteed) bandwidth and maximum bandwidth by service or IP address, while Priority functionality is for services. Both types can control inbound or outbound traffic.
QoS > Bandwidth Management > Rate Control
Bandwidth Management
Bandwidth
Interface The WAN interface is automatically selected.
Upstream Enter the maximum upstream bandwidth provided by your ISP. The default is 512 kbit/sec.
Downstream Enter the maximum downstream bandwidth provided by your ISP. The default is
512kbit/sec.
Bandwidth Management Type
Type Select the type of functionality you want to use, Rate Control or Priority. Rate Control functionality is for minimum (guaranteed) bandwidth and maximum (limited) bandwidth by service or IP address, while Priority functionality is for services. Then proceed to the instructions for the type you selected.
26 |
