Cisco Systems RVL200 manual Rate Control, Priority, Chapter, Advanced Configuration

Models: RVL200

1 117
Download 117 pages 36.96 Kb
Page 35
Image 35
Rate Control

Chapter 4

Advanced Configuration

Rate Control

Service  Select the Service you want.

If the Service you need is not listed in the menu, click Service Management to add the new service. The Service Management screen appears.

Service Management

Service Name  Enter a name.

Protocol  Select the protocol it uses. Port Range  Enter its range.

Click Add to List. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Exit to return to the Bandwidth Management screen.

If you want to modify a service you have created, select it and click Update this service. Make changes. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Exit to return to the Bandwidth Management screen.

If you want to delete a service you have created, select it and click Delete selected service. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Exit to return to the Bandwidth Management screen.

IP  Enter the IP address or range you need to control. To include all internal IP addresses, keep the default, 0.

Direction  Select Upstream for outbound traffic, or select Downstream for inbound traffic.

Min. Rate  Enter the minimum rate for the guaranteed bandwidth.

Max. Rate  Enter the maximum rate for the maximum bandwidth.

Enable  Select Enable to use this Rate Control rule.

Click Add to List, and configure as many rules as you would like, up to a maximum of 100. To delete a rule, select it and click Delete selected application.

Click Summary to see a summary of the Rate Control rules.

Summary (Rate Control Selected)

To change a rule, click Edit. To update the list, click Refresh. To return to the Bandwidth Management screen, click Close.

On the Bandwidth Management screen, click Save Settings to save your changes, or click Cancel Changes to undo them.

Priority

QoS > Bandwidth Management > Priority

Service  Select the Service you want.

If the Service you need is not listed in the menu, click Service Management to add the new service. The Service Management screen appears.

4-Port SSL/IPSec VPN Router

27

Page 35
Image 35
Cisco Systems RVL200 manual Rate Control, Priority, Chapter, Advanced Configuration