Chapter 4 | Advanced Configuration |
Security Model Select the version of SNMP the group uses: SNMPv1, SNMPv2, or SNMPv3.
Security Level This option is available if SNMPv3 is selected for the Security Model. Select No Authentication if no authentication or privacy security levels are specified. Select Authentication if SNMP message origins are authenticated. Select Privacy SNMP messages are authenticated and encrypted.
Operation Select Read if you want the group to have
Select Write if you want the group to have read/write access to the assigned SNMP view; the group can change the assigned SNMP view. Then select the appropriate SNMP view.
Click Add to List, and configure as many entries as you would like, up to a maximum of 15. To delete an entry, select it and click Delete.
Click Save Settings to save your changes, or click Cancel Changes to undo them.
SNMP > Group Membership
Assign users to specific SNMP groups.
SNMP > Group Membership
Group Membership
Membership Table
User Name Enter a name for the user.
Engine ID Select Local if the user is connected to a local SNMP entity.
Select Remote if the user is connect to a remote SNMP entity. Then enter the remote engine ID.
Group Name Select a group for the user.
Authentication Method Select the appropriate method: MD5 Password, SHA1 Password, MD5 Key, or SHA1 Key.
Password If MD5 or SHA1 Password is selected, then only the password will be used for authentication. Enter the password. Its length must be equal to or larger than 8 bytes.
Key IfMD5orSHA1Keyisselected,thentheauthentication key and privacy key will be used for authentication. Enter the authentication key and privacy key. The length of the MD5 authentication key must be 16 bytes. The length of the SHA authentication key must be 20 bytes. The length of the privacy key must be 8 bytes.
Click Add to List, and configure as many entries as you would like, up to a maximum of 30. To delete an entry, select it and click Delete.
Click Save Settings to save your changes, or click Cancel Changes to undo them.
SNMP > Communities
Define the SNMPv1/v2c users.
SNMP > Communities
Communities
SNMP Management Station Select the top option to specify an IP address. Then enter the IP address of this community name.
Select All to specify all IP addresses for all management stations.
Community String Enter the password used to authenticate the management station to the Router.
45 |
