Address Table Commands
show ports security addresses
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 98
5
show ports securit y addresses
The show ports security addresses Privileged EXEC mode command displays the
current dynamic addresses in locked ports.
Syntax
show ports security addresses [ethernet
interface
| port-channel
port-channel-
number
]
Parameters
•
interface
— A valid Ethernet port.
•
port-channel-number
— A valid port-channel number
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
This example displays dynamic addresses in all currently locked ports.
Console# show ports security addresses
Port Status Learning Current Maximum
---- -------- -------- ------- -------
e1 Disabled Lock - 1
e2 Disabled Lock - 1
e3 Enabled Max-addresses 0 1