Cisco Systems SPS2024, SPS208G, SPS224G4

SSH Commands

crypto certificate request

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 414

•ou organization-unit — Specifies the organization-unit or department name.

Range: 1 - 64 characters

•or organization — Specifies the organization name. Range: 1 - 64

characters

•loc location — Specifies the location or city name. Range: 1 - 64 characters

•st state — Specifies the state or province name. Range: 1 - 64 characters

•cu country — Specifies the country name. Range: 2 letters

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC

User Guidelines

Use this command to export a certificate request to a Certification Authority. The

certificate request is generated in Base64-encoded X.509 format.

Before generating a certificate request you must first generate a self-signed

certificate using the crypto certificate generate global configuration command in

order to generate the keys. Be aware that you should reenter the certificates

fields.

After receiving the certificate from the Certification Authority, use the crypto

certificate import global configuration 1command to import the certificate into

the device. This certificate would replace the self-signed certificate.

Examples

Console# crypto certificate 1 request

-----BEGIN CERTIFICATE REQUEST-----

MIwTCCASoCAQAwYjELMAkGA1UEBhMCUFAxCzAJBgNVBAgTAkNDMQswCQYDVQQH

EwRDEMMAoGA1UEChMDZGxkMQwwCgYDVQQLEwNkbGQxCzAJBgNVBAMTAmxkMRAw