GVRP Comman ds
garp timer
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 184
13
Example
The following example enables GVRP on Ethernet port e6.
Console(config)# interface ethernet e6
Console(config-if)# gvrp enable
garp timer
The garp timer Interface Configuration (Ethernet, Port channel) mode command
adjusts the values of the join, leave and leaveall timers of GARP applications. Use
the no form of this command to restore the default configuration.
Syntax
garp timer {join | leave | leaveall}
timer_value
no garp timer
Parameters
•{join | leave | leaveall} — Indicates the type of timer.
•
timer_value
— Timer values in milliseconds in multiples of 10. (Range: 10-
2147483640)
Default Configuration
Following are the default timer values:
•Join timer — 200 milliseconds
•Leave timer — 600 milliseconds
•Leaveall timer — 10000 milliseconds
Command Mode
Interface Configuration (Ethernet, port-channel) mode