RADIUS Commands
radius-ser ver key
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 308
24
The radius-server key Global Configuration mode command sets the
authentication and encryption key for all RADIUS communications between the
device and the RADIUS daemon. Use the no form of this command to restore the
default configuration.
Syntax
radius-server key [
key-string
]
no radius-server key
Parameters
•
key-string
— Specifies the authentication and encryption key for all
RADIUS communications between the device and the RADIUS server. This
key must match the encryption used on the RADIUS daemon.
(Range: 0-128 characters)
Default Configuration
The key-string is an empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the authentication and encryption key for all
RADIUS communications between the device and the RADIUS daemon.
Console(config)# radius-server key enterprise-server