Address Table Commands
port security max
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 87
5
User Guidelines
There are no user guidelines for this command.
Example
In this example, port security mode is set to dynamic for Ethernet interface e7.
Console(config)# interface ethernet e7
Console(config-if)# port security mode mac-addresses
port security max
The port security max Interface Configuration mode command configures the
maximum addresses that can be learned on the port while the port is in port
security max-addresses mode. Use the no form of this command to return to
default.
Syntax
port security max
max-addr
no port security max
Parameters
•
max-addr
— Maximum number of addresses that can be learned on the
port. The range is 1-128.
Default Configuration
The default configuration is 128.
Command Mode
Interface Configuration (Ethernet, port-channel) mode