User Interface Commands
terminal datadump
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 472
33
Example
The following example configures the command history buffer size to 20
commands for the current terminal session.
Console> terminal history size 20
terminal datadump
The terminal datadump User EXEC mode command enables dumping all the
output of a show command without prompting. Use the no form of this command
to disable dumping.
Syntax
terminal dat adump
terminal no d atadump
Default Configuration
Data dump is disabled.
Command Mode
User EXEC mode
User Guidelines
By default, a More prompt is displayed when the output contains more lines than
can be displayed on the screen. Pressing the Enter key displays the next line;
pressing the Spacebar displays the next screen of output. The datadump
command enables dumping all output immediately after entering the show
command.
This command is relevant only for the current session.