QoS Commands
show qos aggregate-policer
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 283
23
An aggregate policer can be applied to multiple classes in the same policy map;
An aggregate policer cannot be applied across multiple policy maps.
This policer can also be used in Cascade police to make a cascade policer.
An aggregate policer cannot be deleted if it is being used in a policy map. The no
police aggregate Policy-map Class Configuration command must first be used to
delete the aggregate policer from all policy maps.
Policing uses a token bucket algorithm. CIR represents the speed with which the
token is removed from the bucket. CBS represents the depth of the bucket.
show qos aggregate-policer
The show qos aggregate-policer Privileged EXEC mode command displays the
aggregate policer parameter.
Syntax
show qos aggregate-policer [
aggregate-policer-name
]
Parameters
•
aggregate-policer-name
— Specifies the name of the aggregate policer to
be displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines.