Cisco Systems SPS2024, SPS208G, SPS224G4

SNMP Commands

snmp-server group

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 338

Parameters

•

groupname—

Specifies the name of the group (Range: 1-30 characters).

•v1 — Indicates the SNMP Version 1 security model.

•v2 — Indicates the SNMP Version 2 security model.

•v3 — Indicates the SNMP Version 3 security model.

•noauth — Indicates no authentication of a packet. Applicable only to the

SNMP Version 3 security model.

•auth — Indicates authentication of a packet without encrypting it.

Applicable only to the SNMP Version 3 security model.

•priv — Indicates authentication of a packet with encryption. Applicable only

to the SNMP Version 3 security model.

•

name

— Specifies the context of a packet. The following context is

supported: Router. If the context name is unspecified, all contexts are

defined.

•

notifyview

— Specifies a string that is the name of the view that enables

specifying an inform or a trap. If unspecified, nothing is defined for the notify

view. Applicable only to the SNMP Version 3 security model.

•

readview

— Specifies a string that is the name of the view that enables only

viewing the contents of the agent. If unspecified, all objects except for the

community-table and SNMPv3 user and access tables are available.

•

writeview

— Specifies a string that is the name of the view that enables

entering data and configuring the contents of the agent. If unspecified,

nothing is defined for the write view.

Default Configuration

No group entry exists.

Command Mode

Global Configuration mode