DHCP Commands
ip dhcp snooping verify
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 133
8
ip dhcp snooping verify
The ip dhcp snooping verify Global Configuration mode command configures the
switch to verify, on an untrusted port, that the source MAC address in a DHCP
packet matches the client hardware address. Use the no form of this command to
configure the switch to not verify the MAC addresses.
Syntax
ip dhcp snooping verify
no ip dhcp snooping verify
Default Configuration
The switch verifies the source MAC address in a DHCP packet that is received on
untrusted ports matches the client hardware address in the packet.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the switch to verify, on an untrusted port, that
the source MAC address in a DHCP packet matches the client hardware address.
Console(config)# ip dhcp snooping verify