Spanning Tree Commands
spanning-tree mst port-priority
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 382
28
Parameters
•
hop-coun
t—Number of hops in an MST region before the BDPU is
discarded. (Range: 1-40)
Default Configuration
The default number of hops is 20.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the maximum number of hops that a packet
travels in an MST region before it is discarded to 10.
Console (config) # spanning-tree mst max-hops 10
spanning-tree mst port-priority
The spanning-tree mst port-priority Interface Configuration mode command
configures port priority for the specified MST instance. Use the no form of this
command to restore the default configuration.
Syntax
spanning-tree mst
instance-id
port-priority
priority
no spanning-tree mst
instance-id
port-priority