Cisco Systems SPS2024, SPS208G, SPS224G4

Address Table Commands

bridge multicast forward-all

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 81

Parameters

•add —

Force forwarding all Multicast packets.

•remove — Do not force forwarding all Multicast packets.

•

interface-list

— Separate nonconsecutive Ethernet ports with a comma and

no spaces; a hyphen is used to designate a range of ports.

•

port-channel-number-list

— Separate nonconsecutive port-channels with a

comma and no spaces; a hyphen is used to designate a range of port-

channels.

Default Configuration

This setting is disabled

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

Example

In this example, all Multicast packets on port e8 are forwarded.

Console(config)# interface vlan 2

Console(config-if)# bridge multicast forward-all add ethernet e8