Web Server Commands
ip https port
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 510
35
ip https port
The ip https port Global Configuration mode command specifies the TCP port
used by the server to configure the device through the Web browser. Use the no
form of this command to restore the default configuration.
Syntax
ip https port
port-number
no ip https port
Parameters
•
port-number —
Port number to be used by the HTTP server. Range: 0-
65535.
Default Configuration
The default port number is 443.
Command Mode
Global Configuration mode.
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
Example
The following example configures the https port number to 100.
Console(config)# ip https port 100