IP Address Commands
ip name-server
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 220
15
ip name-server
The ip name-server Global Configuration mode command defines the available
name servers. Use the no form of this command to remove a name server.
Syntax
ip name-server
server-address
[
server-address2
…
server-address8
]
no ip name-server [
server-address1
…
server-address8
]
Parameters
•
server-address
— Specifies IP addresses of the name server.
Default Configuration
No name server addresses are specified.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they were
entered.
Up to 8 servers can be defined using one command or using multiple commands.
Example
The following example sets the available name server.
Console(config)# ip name-server 176.16.1.18