Cisco Systems SPS2024, SPS208G, SPS224G4

VLAN Commands

switchport general allowed vlan

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 493

Parameters

•add

vlan-list

— Specifies the list of VLAN IDs to be added. Separate

nonconsecutive VLAN IDs with a comma and no spaces. A hyphen

designates a range of IDs.

•remove

vlan-list —

Specifies the list of VLAN IDs to be removed. Separate

nonconsecutive VLAN IDs with a comma and no spaces. A hyphen

designates a range of IDs.

•tagged — Indicates that the port transmits tagged packets for the VLANs.

•untagged — Indicates that the port transmits untagged packets for the

VLANs.

Default Configuration

If the port is added to a VLAN without specifying tagged or untagged, the default

setting is tagged.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

This command enables changing the egress rule (for example from tagged to

untagged) without first removing the VLAN from the list.

Example

The following example adds VLANs 2, 5, and 6 to the allowed list of Ethernet port

Console(config)# interface ethernet 1

Console(config-if)# switchport mode general

Console(config-if)# switchport general allowed vlan add 2,5-6

tagged