Spanning Tree Commands
show (mst)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 389
28
Example
The following example sets the configuration revision to 1.
Console(config) # spanning-tree mst configuration
Console(config-mst) # revision 1
show (mst)The show MST Configuration mode command displays the current or pending
MST region configuration.
Syntax
show {current | pending}
Parameters
•current—Indicates the current region configuration.
•pending—Indicates the pending region configuration.
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
The pending MST region configuration takes effect only after exiting the MST
Configuration mode.