VLAN Commands
switchport trunk native vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 491
34
•remove
vlan-list —
List of VLAN IDs to be removed. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds VLANs 1, 2, 5 to 6 to the allowed list.
console(config-if)# switchport trunk allowed vlan add 1-2,5-6
switchport trunk native vlan
The switchport trunk native vlan Interface Configuration mode command defines
the native VLAN when the interface is in trunk mode. Use the no form of t his
command to restore the default configuration.
Syntax
switchport trunk native vlan
vlan-id
no switchport trunk native vlan
Parameters
•
vlan-id—
Specifies the ID of the native VLAN.