Cisco Systems SPS2024, SPS208G, SPS224G4

IGMP Snooping Commands

show ip igmp snooping groups

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 204

Parameters

•

vlan-id —

Specifies the VLAN number

•

ip-multicast-address

— Specifies the IP Multicast address

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

To see the full Multicast Address Table (including static addresses) use the show

bridge multicast address-table Privileged EXEC command.

Example

The following example shows IGMP snooping information on Multicast groups.

Console# show ip igmp snooping groups

Vlan Group Source Include

Address Address Ports

1 231.2.2.3 172.16.1.1 e1

1 231.2.2.3 172.16.1.2 e2

19 231.2.2.8 172.16.1.1 e9

19 231.2.2.8 172.16.1.2 e10-e11

IGMP Reporters that are forbidden statically:

Vlan Group Address Source address Ports

---- ------------- -------------- --------

1 231.2.2.3 172.16.1.1 e8

19 231.2.2.8 172.16.1.1 e8