802.1x Commands
dot1x bpdu
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 539
36
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The command is relevant when Multiple hosts is disabled and the user has been
successfully authenticated.
A BPDU message with a MAC address that is not the supplicant MAC address is
not discarded in discard mode.
A BPDU message with a MAC address that is not the supplicant MAC address
causes a shutdown in discard-shutdown mode for GE ports, and is not discarded
for FE po rts.
Example
The following command shuts down port e5 upon an unsuccessful authentication
attempt on the port
Console(config)# interface ethernet 5
Console(config-if)# dot1x single-host-violation discard-
shutdown
dot1x bpdu
Use the dot1x bpdu global configuration command to define 802.1x BPDU handling
when 802.1x is globally disabled. Use the no form of this command to return to
default.
Syntax
dot1x bpdu {filtering | bridging}
no dot1x bpdu