QoS Commands
priority-queue out num-of-queues
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 288
23
priority-queue out num-of-queues
The priority-queue out num-of-queues Global Configuration mode command
configures the number of expedite queues. Use the no form of this command to
restore the default configuration.
Syntax
priority-queue out num-of-queues
number-of-queues
no priority-queue out num-of-queues
Parameters
•
number-of-queues
— Specifies the number of expedite queues. Expedite
queues have higher indexes. (Range: 0-8)
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
Configuring the number of expedite queues affects the Weighted Round Robin
(WRR) weight ratio because fewer queues participate in the WRR.
Example
The following example configures the number of expedite queues as 0.
Console(config)# priority-queue out num-of-queues 0