Address Table Commands
bridge multicast filtering
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 76
5
Default Configuration
No static addresses are defined. The default mode for an added address is
permanent.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Using the no form of the command without specifying a MAC address deletes all
static MAC addresses belonging to this VLAN).
Example
The following example adds a permanent static MAC-layer station source address
3aa2.64b3.a245 on port 1 to the bridge table.
Console(config)# interface vlan 2
Console(config-if)# bridge address 3aa2.64b3.a245 ethernet e16
permanent
bridge multicast filtering
The bridge multicast filtering Global Configuration mode command enables
filtering Multicast addresses. To disable filtering Multicast addresses, use the no
form of this command.
Syntax
bridge multicast filtering
no bridge multicast filtering