IGMP Snooping Commands
ip igmp snooping host-time-out
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 196
14
The ip igmp snooping host-time-out Interface Configuration (VLAN) mode
command configures the host-time-out. If an IGMP report for a Multicast group is
not received for a host-time-out period from a specific port, this port is deleted
from the member list of that Multicast group. Use the no form of this command to
restore the default configuration.
Syntax
ip igmp snooping host-time-out
time-out
no ip igmp snooping host-time-out
Parameters
•
time-out
— Specifies the host timeout in seconds. (Range: 60 -
2147483647)
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The timeout should be at least greater than 2*query_interval+max_response_time
of the IGMP router.
Example
The following example configures the host timeout to 300 seconds.
Console(config)# interface vlan 2
Console(config-if)# ip igmp snooping host-time-out 300