System Management Commands
hostname
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 447
31
User Guidelines
Caution should be exercised when resetting the device, to ensure that no other
activity is being performed. In particular, the user should verify that no
configuration files are being downloaded at the time of reset.
Example
The following example reloads the operating system.
Console# reload
This command will reset the whole system and disconnect your
current session. Do you want to continue (y/n) [n]?
hostnameThe hostname Global Configuration mode command specifies or modifies the
device host name. Use the no form of the command to remove the existing host
name (i.e., restore the default hostname “Console”).
Syntax
hostname
name
no hostname
Parameters
•
name
— The host name of the device. (Range: 1-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode