Clock Commands
sntp client enable
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 112
6
sntp client enable
The sntp client enable Global Configuration mode command enables the Simple
Network Time Protocol (SNTP) Broadcast and Anycast client on an interface. Use
the no form of this command to disable the SNTP client.
Syntax
sntp client enable { vlan
vlan-id
} [ethernet interface| port-channel port-channel-
number]
no sntp client enable {vlan
vlan-id
} [ethernet interface | port-channel port-channel-
number]
Parameters
•
vlan-id —
VLAN number
•
interface
— Valid Ethernet port
•
port-channel-number
— Valid port-channel number
Default Configuration
The SNTP Anycast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp broadcast client enable Global Configuration mode command to
enable Broadcast clients globally.
Use the sntp anycast client enable Global Configuration mode command to enable
Anycast clients globally.