Address Table Commands
show ports security
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 97
5
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed:
Console# show ports security
Port Status Learning Action Maximum Trap Frequency
---- ------ -------- ------ ------- ---- ---------
e1 Locked Dynamic Discard 3 Enable100
e2 Unlocked Dynamic - 28--
e3 Locked Disabled Discard, 8 Disable-
Shutdown
The following table describes the fields shown above.
Field Description
Port The port number
Status The values are: Locked, Unlocked
Learning The learning mode
Action Action on violation
Maximum The maximum number of addresses that can
be associated on this port in the Static
Learning mode or in the Dynamic Learning
mode.
Traps S ends traps in case of a violation.
Frequency The minimum time interval between
consecutive traps.