SSH Commands
crypto certificate import
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 416
29
Command Mode
Global configuration
User Guidelines
Use this command to enter an external certificate (signed by Certification
Authority) to the device. To end the session, use a blank line.
The imported certificate must be based on a certificate request created by the
crypto certificate request privileged EXEC command.
If the public key found in the certificate does not match the device's SSL RSA key,
the command will fail.
This command is not saved in the router configuration; however, the certificate
imported by this command is saved in the private configuration (which is never
displayed to the user or backed up to another device).
Examples
Console(config)# crypto certificate 1 import
-----BEGIN CERTIFICATE-----
dHmUgUm9vdCBDZXJ0aWZpZXIwXDANBgkqhkiG9w0BAQEFAANLADBIAkEAp4HS
nnH/xQSGA2ffkRBwU2XIxb7n8VPsTm1xyJ1t11a1GaqchfMqqe0kmfhcoHSWr
yf1FpD0MWOTgDAwIDAQABo4IBojCCAZ4wEwYJKwYBBAGCNxQCBAYeBABDAEEw
CwR0PBAQDAgFGMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFAf4MT9BRD47
ZvKBAEL9Ggp+6MIIBNgYDVR0fBIIBLTCCASkwgdKggc+ggcyGgclsZGFwOi8v
L0VByb3h5JTIwU29mdHdhcmUlMjBSb290JTIwQ2VydGlmaWVyLENOPXNlcnZl
-----END CERTIFICATE-----
Certificate imported successfully.
Issued to: router.gm.com
Issued by: www.verisign.com
Valid from: 8/9/2003 to 8/9/2004