802.1x Commands
dot1x timeout re-authperiod
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 520
36
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables periodic re-authentication of the client.
Console(config)# interface ethernet e16
Console(config-if)# dot1x re-authentication
dot1x timeout re-authperiod
The dot1x timeout re-authperiod Interface Configuration mode command sets the
number of seconds between re-authentication attempts. Use the no form of this
command to restore the default configuration.
Syntax
dot1x timeout re-authperiod
seconds
no dot1x timeout re-authperiod
Parameters
•
seconds —
Number of seconds between re-authentication attempts.
(Range: 300-4294967295)
Default Configuration
Re-authentication period is 3600 seconds.