System Management Commands
show sessions
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 451
31
The show sessions Privileged EXEC mode command lists open Telnet sessions.
Syntax
show sessions
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The command shows the telnet sessions to remote hosts opened by the present
telnet session to the local device. This command will not show telnet sessions to
remote hosts opened by other telnet sessions to the local device.
Example
The following example lists open Telnet sessions.
Console# show sessions
Connection Host Address Port Byte
---------- ------------- --------- ---- ----
1 Remote device 172.16.1.1 23 89
2 172.16.1.2 172.16.1.2 23 8